EPOXY FLOORING SYSTEM FOR – SCHOOLS & EDUCATIONAL FACILITIES (CLASSROOMS, LIBRARIES)

Introduction

Schools and educational facilities require flooring that combines aesthetic appeal, functionality, and long-term durability. Areas such as classrooms, corridors, and libraries experience frequent foot traffic and routine cleaning, making it essential that the floor is smooth, hygienic, and easy to maintain.

The Epoxy Flooring System for Schools & Educational Facilities offers a durable, seamless surface that enhances the environment’s cleanliness, safety, and appearance. Depending on the project requirements, the system can be finished with either Ressi EPO Gloss Might for decorative, high-appearance applications or Ressi EPO Tough Might where functionality and durability are prioritized over gloss.

Recommended Use Cases

• Classrooms and lecture halls
• School corridors and stair landings
• Libraries and reading areas
• Laboratories with minimal chemical exposure
• Staff offices and common areas
• Administrative and reception zones

Step-Wise System Description

Step 1: Surface Preparation

• A properly prepared substrate ensures lasting adhesion and system integrity.
• Ensure the screed is sound, clean, and levelled.
• Mechanically grind or lightly shot blast to remove laitance and contaminants.
• Repair surface defects or cracks using an epoxy-based crack filler.
• Remove dust and debris with industrial vacuuming.
• Confirm that substrate moisture is below 5 % before proceeding.

Step 2: Application of Ressi SLS Primer – 1 (if Required)

• Apply Ressi SLS Primer – 1, a latex-based bonding primer, where a self-levelling screed is required for smoother or more level surfaces.
• Stir thoroughly prior to use.
• Apply evenly using a roller, brush, or spray.
• Avoid puddling and allow to dry for 2 – 4 hours until tack-free.

Step 3: Application of Ressi SLS 610 Self-Levelling Screed (if Required)

• If levelling is needed, apply Ressi SLS 610, a thin, self-levelling cementitious floor screed.
• Mix with clean water as per manufacturer’s ratio.
• Pour and spread evenly using a trowel or gauge rake.
• Use a spiked roller to remove entrapped air.
• Ressi SLS 610 does not require curing but must be allowed 7 – 14 days for moisture release, depending on temperature and humidity.
• Verify moisture < 5 % before proceeding with the epoxy primer.

Step 4: Application of Ressi EPO Primer LV

• Apply Ressi EPO Primer LV, a low-viscosity, solvent-free epoxy primer that deeply penetrates and seals the substrate.
• Mix resin and hardener in the specified ratio.
• Apply evenly with a roller or brush, ensuring complete coverage.
• Avoid pooling and allow to cure overnight before the final coating.

Step 5: Application of the Final Epoxy Topcoat

Select the appropriate topcoat based on the desired balance between aesthetics and functionality:

Option A – Ressi EPO Gloss Might (Decorative & Functional)
• Provides a high-gloss, visually appealing finish.
• Ideal for classrooms, libraries, and reception zones where appearance matters.
• Apply in two coats to achieve a total thickness of minimum 1000 microns.
• Allow 48 – 72 hours for mild traffic; 7 days for full cure.

Option B – Ressi EPO Tough Might (Functional & Durable)
• Provides a semi-gloss, durable surface emphasizing mechanical strength and longevity.
• Suitable for corridors and high-movement areas.
• Apply in two coats to achieve a total thickness of minimum 1000 microns.
• Allow 48 – 72 hours for mild traffic; 7 days for full cure.

Note: For detailed information regarding mixing ratios, pot life, recoat intervals, coverage, and application environment, it is strongly recommended to refer to the individual product Technical Datasheets (TDS) for all materials used in this system before application.

System Advantages

• Hygienic & Seamless: Easy-to-clean, non-porous surface preventing dust accumulation.
• Aesthetic Flexibility: Choice between high-gloss or semi-gloss finish.
• Durability: Withstands continuous pedestrian use and frequent cleaning.
• Chemical Resistance: Tolerates mild cleaning agents and sanitizers.
• Comfortable & Safe: Smooth surface reduces trip hazards and improves reflectivity in classrooms.

Maintenance Guidelines

• Clean using neutral pH, non-abrasive detergents.
• Avoid acidic or solvent-based cleaners.
• Wipe up spills promptly to prevent dulling.
• Inspect periodically and recoat if required to maintain finish and protection.

System Summary Table

Parameter	Description
System Name	Epoxy Flooring System for – Schools & Educational Facilities (Classrooms, Libraries)
Area Type	Schools, Colleges, Libraries, Educational Buildings
Traffic Exposure	Light to Medium Duty
Primary Requirements	Hygiene, Cleanability, Aesthetic or Functional Durability
Optional Layers	Ressi SLS Primer – 1, Ressi SLS 610 (if required)
Primer	Ressi EPO Primer LV
Topcoat	Ressi EPO Gloss Might / Ressi EPO Tough Might
Total System Thickness	Minimum 1000 Microns
Finish Type	Gloss or Semi-Gloss (Depending on Option)
Curing Time Before Use	48–72 Hours for Mild Traffic / 7 Days Full Cure
Key Benefits	Seamless, Hygienic, Durable, Customizable Finish

Conclusion

For schools and educational facilities, the Epoxy Flooring System for – Schools & Educational Facilities (Classrooms, Libraries) provides a safe, clean, and long-lasting surface. By following the sequence — Surface Preparation, Ressi SLS Primer – 1 (if required), Ressi SLS 610 (if required), Ressi EPO Primer LV, Ressi EPO Gloss Might or Ressi EPO Tough Might — institutions achieve a functional, aesthetic, and low-maintenance flooring solution tailored to the diverse demands of educational spaces.

Conclusion

For schools and educational facilities, the Epoxy Flooring System for – Schools & Educational Facilities (Classrooms, Libraries) provides a safe, clean, and long-lasting surface. By following the sequence — Surface Preparation, Ressi SLS Primer – 1 (if required), Ressi SLS 610 (if required), Ressi EPO Primer LV, Ressi EPO Gloss Might or Ressi EPO Tough Might — institutions achieve a functional, aesthetic, and low-maintenance flooring solution tailored to the diverse demands of educational spaces.