TECHNICAL TABLE AND TYPICAL PROPERTIES

Property	Test Method	Result
Appearance Part A	-	Medium viscosity, Clear liquid
Appearance Part B	-	Low viscosity, Clear liquid
Viscosity @ 25°C Part A	ASTM D 2196-05	15,000 – 20,000
Viscosity @ 25°C Part B	ASTM D 2196-05	300 – 600
Mix ratio (Part A: Part B)	ASTM D 2074	100: 50
Pot life (15g mix) @ 25°C	-	3.5 hour
Gel time (24.6g mix) @ 30°C		3h 40m
Hardening time	-	24 hour
Flexural Strength	ASTM D 790	86.7 Mpa
Compressive Strength - Ultimate	ASTM D 695	74 Mpa

^{These are typical results under laboratory conditions, actual coverage and timings may vary as per actual working environment}.

USAGE GUIDELINE

Premix Part A at high speed with a mechanical mixer for 5 minutes, then add Part B and further mix at medium speed for 5 minutes. After pouring the mix in the electronic components, the generated foam will finish by itself after some time. Once the epoxy is tack-free, for superior final performance post-cure it at elevated temperature for 2-4 hours.

PAKAGING

Zepoxy Electro Pot is available as follows:

1.5 KG Set Part A: 1 KG
Part B: 0.5 KG

15 KG Set Part A: 10 KG
Part B: 5 KG

30 KG Set Part A: 20 KG
Part B: 10 KG

HEALTH AND SAFETY

Dispose containers of the materials as per local laws, rules, and regulations. Use gloves, safety masks and other safety apparel as per health and safety laws. For further assistance, please refer to the MSDS of the product for further health and safety information.

Zepoxy Electro pot Clear

Related Products

Your Quote Request